Requirements for the installation

Requirements for the installation

To use your aliunid GATEWAY, the following requirements must be met:

  1. At least one of the following interfaces must be available on your premises:
    1. Electricity meter with pulse light emitting diode
    2. Electricity meter with IR interface (provided that the interface has been activated by your utility company)
    3. Electricity meter with mBus interface (the interface must have been activated by your utility company)
    4. Meters with an RS485 interface (Modbus RTU)
  1. A wireless network must be available at the installation site where you want to install the aliunid GATEWAY. If this is not the case, you can use the aliunid GATEWAY with wireless-wire module.
  2. If you do not use your aliunid GATEWAY with an electricity meter with a customer interface, you must supply your aliunid GATEWAY with power via the USB power supply unit. This means that you need a power socket near your electricity meter.
  3. You need a login for aliunid HOME. If you do not have access data yet, you can register directly in aliunid HOME.

    • Related Articles

    • Installation aliunid Gateway with MBus

      Use this configuration if you want to read your electricity data through a Gateway with MBus and WIFI is available on site. Go to your electricity meter and take the following with you: - Your gateway incl. accessories - Your smartphone with the ...
    • Installation aliunid Gateway with Infrared Sensor

      Use this configuration if you want to read your electricity data through a Gateway with Infrared Sensor and WIFI is available on site. Product Overview: Gateway with Infrared Sensor Go to your electricity meter and take the following with you: - Your ...
    • Installation aliunid Gateway with Blinker Sensor

      Use this configuration if you want to read your electricity data through a Gateway with Blinker Sensor and WIFI is available on site. Product Overview: Gateway with Blinker Sensor 1. Go to your electricity meter and take the following with you: - ...
    • Installation aliunid Gateway with Blinker Sensor + WirelessWire Gateway

      Use this configuration if you want to read your electricity data through a Gateway with Blinker Sensor and you need to forward your WIFI signal with a WirelessWire Gateway. Note: Installation 1/2 (Install Gateway with Blinker Sensor on electricity ...
    • Installation aliunid Gateway with Infrared Sensor + WirelessWire Gateway

      Use this configuration if you want to read your electricity data through a Gateway with Infrared Sensor and you need to forward your WIFI signal with a WirelessWire Gateway. Note: Installation 1/2 (Install Gateway with Infrared Sensor on electricity ...